WHAT ARE THE HAZARDS FOR WORKERS ASSOCIATED WITH LEAD, SILICA, COVID 19 AND ASBESTOS?
LEAD Lead may affect the health of workers if it is in a form that may be inhaled (i.e. airborne particles) or ingested. In order for lead to be a hazard by inhalation, lead particles that are small enough to be inhaled must get into the air. There are three types of particles: dust, fume and mist. Lead dust consists of solid particles created through processes such as blasting, sanding, grinding, and electric or pneumatic cutting. Lead fumes are produced when lead or lead-contaminated materials are heated to temperatures above 500°C, such as welding, high temperature cutting, and burning operations. The heating causes a vapor to be given off and the vapor condenses into solid fume particles. Mists are made up of liquid droplets suspended in air. The spray application of lead-based paint can generate a high concentration of lead-containing mist. SILICA Silica is one of the most common hazards on a worksite, particularly in the construction, oil and gas, manufacturing, and agriculture industries. Silica dust can cause silicosis, a serious and irreversible lung disease. It can also cause lung cancer. As workers breathe in the dust the silica settles in their lungs. ASBESTOS Asbestos fibers are easily inhaled and carried into the lower regions of the lung where they can cause fibrotic lung disease (asbestosis) and changes in the lining of the chest cavity (pleura). These diseases can lead to reduced respiratory function and death. Long-term inhalation of asbestos fibers also increases the risk of lung cancer and mesothelioma. Enlargement of the heart can also occur as an indirect effect from the increased resistance of blood flow through the lungs. COVID-19 COVID-19 is caused by infection with the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus strain. Worker risk of occupational exposure to COVID 19 during the pandemic may vary from community to community, depending on local conditions or outbreaks. Exposure risk depends in part on the physical environment of the workplace, the type of work activity, the health status of the worker, the ability of workers to wear face coverings and abide by BC CDC guidelines, and the need for close contact (within 6 feet for a total of 15 minutes or more over a 24-hour period) with other people, including those known to have or suspected of having COVID 19, and those who may be infected with—and able to spread—SARS-CoV-2 without knowing it. Other factors, such as conditions in communities where employees live and work, their activities outside of work, and individual health conditions, may also affect workers’ risk of getting COVID-19 and/or developing complications from the illness. WHERE CAN YOU PURCHASE SILICA, LEAD, COVID 19 OR ASBESTOS EXPOSURE CONTROL PLAN TEMPLATES? Currently the following ECP templates are the bestselling in BC and are approved by WorkSafeBC Standards. Click on the following links to view: SILICA EXPOSURE CONTROL PLAN TEMPLATE BC LEAD EXPOSURE CONTROL PLAN TEMPLATE BC ASBESTOS EXPOSURE CONTROL PLAN TEMPLATE BC COVID 19 EXPOSURE CONTROL PLAN TEMPLATE BC WHAT ARE EMPLOYER RESPONSIBILITIES WHEN IT COMES TO EXPOSURE CONTROL PLANS? Section 6.4 of the WorkSafe BC Regulations state If a worker is or may be exposed to potentially harmful levels of asbestos, the employer must develop and implement an exposure control plan meeting the requirements of section 5.54 and to ensure adequate coordination of the overall plan, the employer must ensure that it is administered by a properly trained person. Sections 5.54 of the WorkSafeBC Regulations states: An exposure control plan must be implemented when: (a) exposure monitoring under section 5.53(3) indicates that a worker is or may be exposed to an air contaminant in excess of 50% of its exposure limit, (b) measurement is not possible at 50% of the applicable exposure limit, or (c) otherwise required by this Regulation. (2) The exposure control plan must incorporate the following elements: (a) a statement of purpose and responsibilities; (b) risk identification, assessment and control; (c) education and training; (d) written work procedures, when required; (e) hygiene facilities and decontamination procedures, when required; (f) health monitoring, when required; (g) documentation, when required. (3) The plan must be reviewed at least annually and updated as necessary by the employer, in consultation with the joint committee or the worker health and safety representative, as applicable. WHAT ARE EXPOSURE CONTROL PLANS? An Exposure Control Plan or known as ECP is a document on particular hazardous substances that provides direction and expectations to prevent exposures to workers. Depending on where you operate, your regulatory authority in BC may require you to have one or more exposure control plans. If an employer fails to develop and implement an exposure control plan, orders by WorkSafeBC can be issued to the employer to motivate action and compliance and with the potential for a stop work order. Occupational health statistics indicate that more than 50% of all fatalities in Alberta and BC are due to occupational disease. In 2015, WorkSafeBC stats indicated that there were 122 deaths due to occupational disease and 72 were due to worksite exposures. Overall, there is a trend for more claims for occupational disease/illnesses being recognized and accepted by workers compensation boards. Exposure Control Plan’s are meant to control the hazards and eliminate or mitigate the risks associated with potential exposure. Regulators want to see that prevention from occupational disease is being taken seriously and included in health and safety management systems. More than 50% of all fatalities in AB and BC are attributed to occupational disease. In 2015, out of 122 occupational disease deaths 72 were due to worksite exposures (WorkSafeBC 2015). The purpose of an Exposure Control Plan is to detail:
WHO CAN DEVELOP AN EXPOSURE CONTROL PLAN? A qualified person from the employers side may develop an ECP. Qualified means this person either has the years of experience working with the hazardous substance or has the education credentials to do so. WHAT ELSE DOES AN EMPLOYER HAVE TO DO AFTER AN ECP HAS BEEN DEVELOPED? After developing and implementing your Exposure Control Plan, employers must make sure that the controls are effective:
5 Comments
10/9/2022 12:07:14 pm
Sing she site. White investment from and sure trouble first. Soldier item manager century see.
Reply
2/10/2023 11:34:24 am
You are a genius. Not only do these strategies work, but you make them so plain and easy to follow. Great writing. Thank you so much for your nice blog post. At PCS Safety, Inc., we feel that Cal OSHA would much rather let employers take time to hire a good health and safety consultant. The highly experienced professional consultant must know what the standards are and how these standards are being enforced in the field. Call us today at (602) 899-9477
Reply
2/10/2023 11:39:01 am
I really enjoy reading your posts where I can get such useful information. Thanks for all your advice. It’s invaluable! California State requires additional safety training aside from the federal Occupational Safety and Health Administration (OSHA) regulatory program. It also has separate standards and health/safety policies known as Cal OSHA. The Cal OSHA safety training module ensures that workers are eligible for workplace safety for their positions regardless of industry.
Reply
4/27/2023 01:03:44 pm
I really find your blog very helpful. I have even started using Hootsuite! Thanks for all of your blogging tips. They really do help! PCS ProStaff constantly innovate our approaches to deliver growth to our clients through top-tiered recruiting, staffing and business support practices and solutions. Contact us today at (866) 413-4103 to know more!
Reply
4/27/2023 02:05:37 pm
I love all your blog articles, It’s especially helpful for people starting out, like me! It’s nice to have a blog to follow that’s so informative. PCS Prostaff can perform administrative support functions so you can channel your resources and personnel on core aspects of the business. Effective administrative support makes a significant impact on an organization as well as overall morale of your employees.
Reply
Leave a Reply. |
AuthorGreystone Safety Services BC Archives
March 2021
Categories |